Any suggestions or advice would be greatly appreciated.I’ve used the same batteries for over a week now. So far, my unit has been spot on to both an Acurite AND a Texas Instruments weather station. ), but that’s been 6 weeks and haven’t heard anything, not that I need to push the issue, they may be involved in fixing things. Read our post about Aldi’s newest facial care products here. I’m going to look around for a 3v transformer (old cell phone charger or something) and solder it to the battery terminals. the purposes illustrated in the cookie policy. النشرة الجوية Serra Caiada, البرازيل - Meteogram | Weather2Umbrella LTD - Social Weather Network Last night was the coldest it’s gotten in my area this season. Take that and put into inhg spot in conversion tool. station, make sure the units are within range of each other or repeat the battery installation procedure. Anyone have an update to this?Mine has the inHg also…but as far as I know, it cant be changed. In addition to the solar/battery idea, I considered a power brick plugged into an outside outlet (which is conveniently-enough located to where I’d want the sensor).Still, that’s not going to address the self-heating and thus quite inaccurate readings, unless you slap a small fan on it too, now this is getting ridiculous. Now I cannot find one that I like the display as well.I bought 3 of the 2015 or 2016 units and they have worked well. Black wire to negative and any other color wire to positive. I took three of them back to Aldis. The day/date setup can’t be changed.

But there is a quality control problem here. The ones sold this year had model numbers of. I placed the station in my house, placed the sensor in a covered space outside as the instructions said, then began powering things up. this is all I did. That would be due to the higher voltage.

the sensor did burn through the batteries that came with the unit in 2 days. $15.32 (9 used & new offers) See Details.
centrale Snagged one and immediately checked it out — you guessed it, still sucking 35 mA, and to add to the consternation, it came with the switch already set to F. Another BTW, when I unpacked the unit, I got quite excited to see a USB connector on the display, leaving me with visions that this could be connected to a computer….but alas, it is just a charging port. The remote sensor works, the red LED blinks occasionally, but nothing shows up on the main unit (tried all channels, tried removing batteries for a while, tried removing power from both for a while, F/C, etc.) I don’t know what to tell you.I have the same problem. The last thing I would guess you want to do to fix the “too much voltage” issue is to satisfy that with an external source that would provide “too much voltage”. EDITOR’S NOTE: This review is for the 2016 version of the weather station. I guess it pays to fiddle a little. Way back, I had an email dialog with their support, who said they were shipping me a new unit (whole thing or the sensor?

Do not buy at any price.do me a favor and try this. This was an F grade on their part for quality control and has taken a lot of my time to fix THEIR problems which easily should have been caugh by them… 7 degrees too high on outside temperature when in the F position on sensor and batteries lasting only 2 days…100% unacceptable, even if this gimmick fix works.


Not a shocker that it would heat up the sensor which of course is why the temperature was registering too high to begin with when set to F position. The day/date display, for example, is inverted compared to North American sensibilities, and the default temperature readout is Celsius.