When in the UEFI menu, do you see a disk drive icon upper right with a line or X Also: Attach a bootable USB device to the USB port Swipe in from the right and then tap Settings Tap Change PC Settings Tap Update and recovery Tap Recovery Under Advanced Startup, tap Restart now On the Choose an option screen, tap Use a device On … It is also possible that your computer has not been set up to boot from the USB at all even though it is supported. the Surface device won't let you proceed with the reimaging process. Anything but ordinary.Press J to jump to the feed. Any insight would be great. I disabled every other boot. I tried 2 USB drive so far. Next, Press and hold the volume down button of your Surface Book 2. After the install, shut down the surface, reset the UEFI settings for TPM, Secure boot etc..Boot from your UEFI windows installation / recovery media
The Boot Configuration Data file doesn’t contain valid information for an operating system”
I guess they don't want it to affect the book.Are you sure you set up the device to be bootable? Otherwise, don't hesitate to respond to this thread if there's anything else you need to be addressed.Thanks for your feedback, it helps us improve the site.Thanks for your feedback, it helps us improve the site.Thanks for your feedback, it helps us improve the site.Thank you for keeping me posted. I prepared recovery disk on different computer, added surface files as advised by Microsoft guide. Install Ubuntu taking over entire disk! Make sure to transfer any important data from your USB drive to another storage device before using it to create a SurfaceInsert your USB drive into the USB port of your PC. Recovering this PC.If prompted for BitLocker Key, tap Skip this Drive and continue with the reimaging process. Discuss the workings and policies of this site On Surface Pro and Surface 3 are using UEFI (Unified Extensible Firmware Interface), not … The image should be signed, so the UEFI should list it as a boot option.We have this issue with Samsung Win 8 Pro tablets and (following exact same steps) have been unable to boot to USB. Tap and hold or right-click on the USB drive and choose FormatSelect FAT32 as the file system and enter a Volume label to name the USB drive, such as RECOVERY, and then tap or click StartTap or click OK to erase the contents of the USB driveOn your Surface or PC, open recovery image that you downloaded by double-clicking it or right click then select Extract and then Extract all.Select the USB drive you formatted earlier for the location and click Extract.When the Surface logo appears, release the volume-down (-) rockerSurface will start the recovery software on the USB recovery driveWhen prompted, choose your language options and keyboard layoutSelect Recover from a Drive. I'm wondering if the tablets have some additional hardware fingerprint checking so that it's as difficult as possible to change boot options...You will also need to use 64-Bit UEFI capable bootloaders - try a 64-Bit UEFI Ubuntu on your USB.? I did set up the USB with window 10 boot up. Applies to. Then I start surface and I can only go into UEFI menu. Whereas when the USB was made 'bootable' as is described in the "link" above for the Surface 2 recovery procedure from Microsoft, it did work successfully. None of it works.UEFI based systems such as the Surface Pro or other UEFI systems Can you boot Windows-on-the-Go (or whatever its called). This site in other languages Use Rufus to turn the ISO into a UEFI USB install Now press and release the power button while holding down the volume-down button on your Laptop. I tried 2 USB drive so far. A recent copy of Ubuntu I turned off secure boot, TPM and set the USB service to be first in the boot order. I guess they don't want it to affect the book.Are you sure you set up the device to be bootable? Anybody can answer No worries. Edit2: It's not solved. Step 3: Press and hold the volume down (-) button on the left side of Surface Pro 3. Press question mark to learn the rest of the keyboard shortcuts
I want to reformat my Surface Book through USB boot.
It didn't recover from the USB. The best answers are voted up and rise to the top Edit: it's been solved. Also when I swipe left to start the USB boot, it restart and goes back to Surface UEFI menu instead of booting from USB. Surface will start the recovery software on the USB recovery drive”. Surface is stuck at windows logo with notification that I disabled secured boot.Any ideas? Anything but ordinary.Press J to jump to the feed. Google didn't help much. Old cables or hubs without the additional 3.0 pins will force the drive back into 2.0 mode, making it bootable. This should boot you to a recovery menu from your SSD on your Surface, but this is when I finally got it to boot from USB. The method to boot Surface from USB drive is very different from the method to boot normal computer (desktop and laptop) from USB that need to set on BIOS settings. In my case, a Team X101 32GB USB 3.0 worked while a … The USB iso boots when it's any other version besides the enterprise one.You can't install enterprise version of window 10 on surface book. Surface Book, Surface Book 2, and Surface Book 3; Surface Laptop (1st Gen), Surface Laptop 2, Surface Laptop 3; Surface Go, Surface Go 2 ; To change the Surface boot configuration: Select Boot configuration.
Nothing works. It only takes a minute to sign up.I have had a surface pro for a while now and I have decided to try and boot from USB on it.
Any other version window 10 will work. Press and hold volume down button. Insert the USB stick directly into your Surface. Only error screen for disk boot or hang up on windows logo when booting from usb.