Is it high-vacuum (1e-6 torr level) compatible?

This connector can also be used to connect one 2" wide 30 mm cage cube, such as our C4W or C6W, with a SM1-Threaded 30 mm Cage Plate, 0.35" Thick, 2 Retaining Rings, M4 Tap SM1-Threaded 30 mm Cage Plate, 0.50" Thick, 2 Retaining Rings, M4 Tap SM1-Threaded 30 mm Cage Plate, 0.35" Thick, 2 Retaining Rings, 8-32 Tap SM1-Threaded 30 mm Cage Plate, 0.50" Thick, 2 Retaining Rings, 8-32 Tap SM1-Threaded 30 mm Flexure Cage Plate, 0.35" Thick, 2 Retaining Rings, Metric SM1-Threaded 30 mm Flexure Cage Plate, 0.35" Thick, 2 Retaining Rings, Imperial SM1-Threaded 30 mm Cage Plate with Flexure Clamping, 1 Retaining Ring, M4 Tap SM1-Threaded 30 mm Cage Plate with Flexure Clamping, 1 Retaining Ring, 8-32 Tap Customer Inspired! SM1-Threaded 30 mm Cage Plate, 4.0 mm Thick 30 mm Rotating Cage Segment Plate, Two SM1RR Retaining Rings Included, Metric 30 mm Rotating Cage Segment Plate, Two SM1RR Retaining Rings Included, Imperial Customer Inspired! 30 mm Removable Segment Cage Plate, 0.35" Thick, Metric 30 mm Removable Segment Cage Plate, 0.50" Thick, MetricNEW! Both plates are identical to the CPA1 (shown to the left) on the front. Best, They have a center-located SM1 (1.035"-40) threaded bore that is compatible with our SM1 threaded optomechanical components.

The CPU1 consists of two plates: one attaches to a fixed cage segment, while the other rotates all attached cage elements. This unique feature is illustrated in the diagram to the right. These holes are machined for a precision slip fit with mating cage rods and provide side-accessible locking screws that fasten the plate to their mating assembly rods for positioning. Do not overtighten the tension plate, this could damage the optic. We also offer platform mounts, filter mounts, U-bench mounts, and a cuvette holder. They are available with M6, M8, M9, M10, or M12 internal threads. 498 0 obj <>stream

For additional convenience, an 8-32 (M4) tapped hole is provided for post mounting applications.For those looking to convert from the 30 mm to the 16 mm cage system standard, Thorlabs offers a similar product, the The CP33(/M) cage plate is 0.35" (8.9 mm) thick and provides a center-located SM1 (1.035"-40) threaded bore that is compatible with our popular Ø1" lens tubes. Part Number: LCP02 -Ask a technical question Ask a technical question. The 30 mm cage plates featured below provide a means for mounting optical components with diameters ranging from 5 mm to 1" within a cage system. I need to modify CP01 plate to accommodate our own creations but can not use the set screws to lock the plate in place. Kinematic Mirror Mounts. Each cage plate contains four corner-located, Ø4 mm through-holes with a center-to-center spacing of 16 mm. Cage System … Our Blank cage plates are ideal when standard threads and hole sizes are insufficient for custom mounting and OEM-level requirements. This design compensates for the tolerance stacking effects common in cage systems, ensuring that the cage plate never binds or sticks within a constructed cage segment. The CPG3 is designed with a large aperture in mind. SM1-Threaded (1.035"-40) cage plates and cage cubes allow Thorlabs introduced the SM Thread Standards to ensure compatibility over a broad range of product lines. Each cage rod through hole is accompanied by a side-located locking setscrew, which can be secured using a 0.05" (1.3 mm) Thorlabs' CPU1 30 mm Rotating Cage Segment Plate allows an entire 30 mm cage subsystem to be rotated about the optical axis. The cage mount features two flexure locks with cap screws that can be tightened using a 5/64" (2 mm) hex key or balldriver. The The flexibility of our Cage Assembly System stems from well-defined mounting and thread standards designed to directly interface with a wide range of specialized products. Each cage rod through hole is accompanied by a side-located locking setscrew, which can be secured to a cage rod using a 5/64" (2.0 mm) or 0.05" (1.3 mm) hex key (see the table below).30 mm Cage Plate for Ø5 mm Optic, 2 SM5RR Retaining Rings Included30 mm Cage Plate for Ø6 mm Optic, 2 SM6RR Retaining Rings Included30 mm Cage Plate for Ø8 mm Optic, 2 SM8RR Retaining Rings Included30 mm Cage Plate for Ø9 mm Optic, 2 SM9RR Retaining Rings Included30 mm Cage Plate for Ø15 mm Optic, 2 SM15RR Retaining Rings Included30 mm Cage Plate for Ø18 mm Optic, 2 SM18RR Retaining Rings Included30 mm Cage Plate for Ø20 mm Optic, 2 SM20RR Retaining Rings Included30 mm Cage System Alignment Plate with IR Disk (790 - 840 nm, 870 - 1070 nm, 1500 - 1590 nm)30 mm Cage System Alignment Plate with MIR Disk, 1.5 to >13.2 µm